Remington 770 Rifle With Scope 308 Win Review

Remington 770 stalking rifle.
The U.s.a. stalking ethos is very different to that in Britain.

Many hunters often have no real involvement in firearms and are happy to borrow or purchase a cheap rifle that is shot once a year and and so locked upward later on the hunting season.

Remington has spotted a hole in the market place and now offers a ready-built rifle, complete with mounts and a telescopic for a realistic toll.

An updated version of the original 710 rifle, the new Model 770 does have a place here in the UK, despite its Americanisms.

It would make a good first burglarize or a no-nonsense estate gun. Its all-weather synthetic stock and drab metal finish volition not endear it to the traditionalist, but it is practical on a sporting arm that will weather hard wearable and is chambered in vii popular deer cartridges.

Despite a synthetic stock, the burglarize weighs 8.5lb without the scope, and so this is no lightweight. Yet, this is reassuring on a cheaper gun, where that extra bit of heft might make for a stronger, more resilient rifle.

Its overall length is pretty standard at 42.25in, merely it is surprisingly comfortable to shoulder and points very well in the aim. Assuming new action Remington boldly went back to the drawing board and designed a dissimilar action ? though it is similar to the true-blue Model 700 serial.

In keeping with modern trends and to cut tooling costs and industry, the Model 770 action is but available in one action length, which allows seven unlike calibres to be chambered correctly: .243, .308, 7mm-08, .thirty-06, .300 Win mag, .270 and 7mm Rem mag.

It is long, at six.25in, and has an enormous ejection port to the right side which cuts through a typically rounded activity shape. The pinnacle of the receiver is drilled and tapped for a jumpsuit Weaver-fashion telescopic base, which is supplied and fitted and is all finished in a drab black stop.

To the rear, on the left side, is a toggle lever that releases the bolt. In the back position this is locked down and the bolt cannot be removed, while in the upright position the bolt tin be removed for cleaning the butt or maintenance.

It?south a fleck fiddly, but actually ameliorate than the triggermounted Model 700?s catch. The commodities itself is a sturdy affair, but the head section is secured to the commodities body with pins and has a three-locking lug orientation.

This means there is the potential for a adept solid supported lock-up on endmost the activity and also means the bolt lift is shallower than that of a conventional ii-lug organisation.

The caput is fully supported and has the typical plunger-type ejector and sprung steel extractor in its face up, which, despite their size, practise a fine job of cartridge manipulation. The bolt handle is slightly aptitude down and back with a rounded knob to grip while in performance and proved quite shine, though on the .308 tested – was a little long in travel.

TRIGGER, Rubber AND Magazine
The trigger is a standard Remington unit, with a unmarried-stage pull that was heavy at 6.25lb, but improve than you lot would await on a budget rifle.

You could have the trigger looked at by a competent gunsmith or replaced with a expert merely reasonably priced Timney model, though this would defeat the reason for ownership this cheaper model in the first place.

The trigger was more than proficient enough on this model rifle. The condom is familiar with a rocking lever to the right side of the action backside the bolt handle.

In the frontward position the rifle can be fired and rearward the trigger is locked and therefore safe. A adept characteristic is the detachable magazine. This differs from previous Remington designs, in that the twin side-mounted catches are done away with and replaced by a single front-mounted securing catch.

Pop this and the mag falls into the mitt. Information technology is reinserted rear-first to appoint a recessed lug cut-out and pushed upwards and locked home.

No fuss and secure, despite being made of plastic with steel sides. In the .308 model, the magazine holds four rounds.

BARREL AND SIGHTS
This Model 770 came with a 22in carbon steel butt in a sporter profile with a bore of 0.675in at the muzzle.

The finish is the aforementioned as the activity, drab black merely practical. This is not a burglarize to admire aesthetically, but it does the job in mitt.

At that place is the choice of a stainless steel butt, just but in express cartridge chamberings and the stock comes with a cover-up coating rather than blackness.

The barrel is push-rifled and in .308 has a i-in-10in twist with vi grooves for its 22in length. What makes the 770 different is the supplied scope and mounts. In the rifle on test this was a jumpsuit aluminium Weaver-type rail with a Bushnell 3-9×40 scope attached by 1in mounts.

This comes from the factory boresighted, so should get you near the marker before you sight the rifle. It?south a basic, no-nonsense telescopic, merely do non expect great low-light abilities.

RUGGED BLACK SYNTHETIC STOCK
Probably the instantly recognisable feature of the 770 is the black synthetic stock. It is rugged and applied only not very pleasing to the eye.

It is moulded in ii halves and then cemented together, only unlike some stocks in this market place feels stiff and quite solid, especially in the critical areas of bedding and the fore-finish.

It?due south non perfect, just adequate for a rifle at this price level. The length of pull is 13.25in, a scrap short, but there is a solid black recoil pad and raised cheekpiece to give a 2.5in tiptop from the top of the stock to the center level when looking through the telescopic.

The pistol grip has a stippled panel to each side that extends right along the stock to the fore-end, giving additional grip to the 5 angled panels that are moulded into the side and underside of the fore-end itself.

The barrel is not free-floated but, all in all, the stock really feels solid and is surprisingly comfortable.

There are two areas that business me, however. First, the moulded in sling-hinge studs that, though silent in use, look a bit thin ? I would adopt metal. 2nd, the trigger-baby-sit is monstrous to await at.

It has a meaningless additional rear moulding, which I am certain most owners would remove.

SURPRISING RESULTS IN THE FIELD
I was quite prepared to exist underwhelmed with the performance, given that the 770 has a toll tag of less than £500, but I accept to say the Remington pedigree must have rubbed off because this rifle gave some surprisingly good accuracy results.

Being .308, I chose 150- and 165-grain bullets, with the addition of some lighter 110- to 125-grain bullets for fox or deer applications.

I also used a smattering of mill ammunition from Sako, Federal and Remington to complete the testing at 100 yards.

The Federal 150-grain Power-Shok loads with a standard soft-tipped bullet printed i.5in three-shot groups at 100 yards and produced ii,731fps for two,485ft/lb.

The Remington 165-grain Accu-Tip sped forth at two,621fps with ii,518ft/lb energy and printed just over the inch, which was encouraging.

The Sako 150-grain Super Hammer Head shot nether the inch consistently, sometimes three shots clustered into 0.85in.

From a inexpensive rifle with factory ammunition that is really rather impressive.

Fine-tuning with reloads commonly helps shrink groups, and I managed to meliorate the Sako manufacturing plant forage, merely simply just with 150- grain Nosler Ballistic Tips and 44.5 grains of H4895 powder ignited with a CCI 250 magnum primer.

This accomplished two,717fps and 2,459ft/lb and shot several groups of 0.75in with the bullets seated shut to the rifling.

I tried some Speer 110-grain hollowpoints at iii,000fps and some 125-grain Ballistic tips at 2,987fps but that produced groups over the 1in marker.

The best load was with the 110-grain Speers and 45 grains of H322 pulverization for 3,058fps and 2,285ft/lb free energy.

CONCLUSIONS
I was actually surprised at how the Remington performed out in the field and in the mitt.

Cheap, yes, but certainly non nasty ? especially if y'all are one of those occasional stalkers who wants a prepare-made package, or a seasoned stalker who wants a second burglarize in a differing calibre, as a tough knock-nigh gun.

The stock was comfy to employ, but that trigger-guard needs attention.

Remington must have realised this as it at present offers the aforementioned barrelled activeness but with a more conventional stock ? the Model 715.

Accurateness was quite expert for a budget rifle. And so, all in all, for the price, the Model 770 is certainly worth because.

£474

Contact: Edgar Brothers 01625 613177

glenndience.blogspot.com

Source: https://www.shootinguk.co.uk/reviews/rifle/remington-770-stalking-rifle-review